Technical components

Lance head

 

The dimensions and external surface of the V3 head have been reduced while the internal surface has been enlarged. This has improved the transfer of heat from the inside to the outside. Flush-mounted anodized aluminum nozzles further increase the heat transfer to the nozzle shafts. The opening angle between the nucleators has been enlarged and the arrangement of the controllable nozzles has been optimized. Snow output has improved as a result of these modifications. Like all the TechnoAlpin snow guns, the V3 has wear-resistant nozzles with ceramic inserts.

Schneilanze, Lanze, Schneeerzeuger V3

Lance construction

 

The robust mechanical stand is made of galvanized steel to guarantee added stability and has plug-in connectors for easy installation. The height of the lance is adjusted by means of the hydraulic lifting cylinder.

Schneilanze, Lanze, Schneeerzeuger V3

Valve block

 

Another outstanding feature of the overground valve block with water filter is its excellent accessibility allowing rapid and simple cleaning of the filter and drains without having to climb down into the pit. Water and air can be connected easily without the risk of confusion, as the Camlock couplings are different sizes.

Schneilanze, Lanze, Schneeerzeuger V3

Oil-free compressor

 

All the snow guns produced by TechnoAlpin since 1999 have been fitted with an aluminum oil-free piston compressor with integrated cooling circuit. The oil-free compressor supplied by Kaeser boasts excellent green credentials in guaranteeing that not one single drop of oil will leach into the environment. An oil-free piston compressor also consumes less energy at the same rate of air flow. Oil-free compressors do not require an annual service. With no oil filters, trap cartridges, oil level monitors and stationary heating installations, this all adds up to a reduction in annual running costs.

Beschneiungstechnologie, Kunstschnee, maschinelle Beschneiung, Maschinenschnee, technische Beschneiung, Schneeanlage

Meteostation

 

Up-to-date weather information is needed so that the snow gun parameters can be adjusted to the prevailing conditions for optimum performance. The data collected in the meteostation therefore always include the current air temperature and relative atmospheric humidity as a minimum. It is also possible to install sensors to measure the wind direction, wind speed and snow height.

Schneilanze, Lanze, Schneeerzeuger V3

YB valve

 

The automatic YB valve of pressure class PN100 regulates the snow gun water pressure, water flow rate and airflow. The opening and closing cycle includes water and air discharge. The valve has a patented closing mechanism which guarantees automatic closure in the event of a power failure.

Water filter

 

The water filter with seamless wedge wire filter insert made of nickel chromium steel guarantees fault-free operation, simple cleaning and long service life.

Plug-in base

 

The simple and sturdy plug-in connection of the mechanical stand makes it quick and efficient to fit on initial installation and just as easy to dismantle. The new plug-in base has a double hole gage and a flat base – therefore it is suitable for various pit and concrete foundations.