MTS Manual Tower Snowgun - Technical data

SPECIFICATIONS	SIZE	MTS
Dimensional data gun
Length A2	mm / in	1700 / 66.9
Width B2	mm / in	980 / 38.6
Height H2	mm / in	1500 / 59.0
Dimensional data support
Length A1	mm / in	1700 / 66.9
Width B1	mm / in	720 / 28.3
Height H1	mm / in	3300 / 129.9
Dimensional data
Total height H	mm / in	5000 / 196.5
Snowfall height H3	mm / in	4400 / 173.2
Weight
Complete MTS	kg / lb	700 / 1543.3
Support P1	kg / lb	35 / 77.12
Gun P2	kg / lb	320 / 705.5
Valve block P3	kg / lb	25 / 55.2
Control cabinet P4	kg / lb	100 / 220.5
Compressor P5	kg / lb	80 / 176.4
Tower P	kg / lb	170 / 374.79
Electrical data
Rated voltage	*V	400 / 480 / 600
Full load current	*A	40 / 35 / 30
Nominal frequency	*Hz	50 / 60
Largest motor	kW / HP	12.5 / 17
Compressor	kW / HP	4 / 5.44
Heating	kW	0.5 - 1.7
Fuse	*A	63 (Typ 1)
Miscellaneous technical specifications
Swinging	angle°	360°
Turbine inclination	angle°	40°
Camlock connection	in	2
Operating water pressure	bar / psi	8 - 40 / 116 - 580
Pressure max.	bar / psi	50 / 725.2
Operating air temperature	°C  °F	minus 25 - plus 2   minus 13- plus 35.6
Water filter	micron	250
Nucleators	no.	6
Fixed nozzles type Quadrijet	no.	6
	size	5 l/min at 4 bar  1.32 gpm at 58 psi
Controllable nozzles type Quadrijet	no.	12
	size	10 l/min at 4 bar   2.64 gpm at 58 psi
Control unit - PLC	no.	1

(*): Subject to changes based on the type of plant and/or on the installation type (refer to the wiring diagrams).