Compact dimensions. Low weight. Easy handling.

The T40 is the most compact fan gun developed by TechnoAlpin and is popular on account of its slim dimensions and low weight.

The T40 snow gun has a manual vertical height adjustment mechanism and a motorized horizontal swing device with manual release. Access can be gained to the swing release, height adjustment and valve block on the same side of the snow gun, and the graphical user interface comes with color monitor and LED-backlit keys. This facilitates the job of producing snow, even in adverse weather conditions. The display is also fitted with protective cover and anti-vandalism device. Bluetooth remote control of the machine is also available as an option. This brings even more flexibility and convenience to operate the gun.

Pictures & brochures
Technical components
Mobility & versatility
Facts & figures

Pictures & brochures

Technical components

Nozzle ring

TechnoAlpin fan guns are fitted with hard-wearing Quadrijet nozzles with ceramic inserts. The ceramic inserts guarantee a high level of durability and resistance even when used with aggressive water. The four-jet technology is used to optimize and equalize the spray action and therefore to guarantee top snow quality. TechnoAlpin has been using this advanced technology since 1992 and the heating system in the nozzle ring operates selectively, resulting in reduced energy consumption.

38_Düsenkranz

Valve technology and water filter

Nozzles can cut in and out on all TechnoAlpin snow guns depending on the temperature. This keeps the quality of the snow consistently high. This regulation can be a simple and infinitely variable process thanks to the valve block. The WEDGE WIRE water filter insert, which is made of high-quality nickel chromium steel, is also integrated in the valve block to save space. It has no weld seams and is therefore extremely durable.

43_Ventilblock in Aluguss mit integriertem Wasserfilter, T-Klasse

Oil-free compressor

The snow guns produced by TechnoAlpin are fitted with an aluminum oil-free piston compressor with integrated cooling circuit. This system has been in use since 1999, allowing the snow guns to be positioned at any angle. The oil-free compressors made by Kaeser are also very environmentally friendly and ensure that no oil escapes into the environment through the snow production process. They operate at the same flow rate and yet they use less energy and do not need to be serviced annually. With no oil filters, trap cartridges, oil level monitors and stationary heating installations, this all adds up to a reduction in the annual running costs of a snowmaking system.

Turbine

A turbine with externally-mounted motor achieves a high air throughput and thereby guarantees a high snow output. With a fan output of 12.5 kW and 4 kW of compressor power, the T40 boasts excellent energy specifications. An optional blade heating system can be fitted to prevent the snow gun from breaking down, even in adverse weather conditions.

Meteo station

Up-to-date weather information is needed so that the snow gun parameters can be adjusted to the prevailing conditions for optimum performance. The current air temperature and relative humidity are therefore always measured and processed in the meteo station. It is also possible to install sensors to measure the wind direction, wind speed and snow depth.

Robust electronics

The electrical equipment of the snow guns complies with all the applicable regulations in the relevant countries. The function and service life of some components could be adversely affected by frost therefore all such components are heated. The graphical user interface with color monitor displays all the snow gun data clearly, and the electronic control unit ensures failure-free operation and optimum regulation.

Mobility & versatility

Mobile stand

With an overall height of 2.45 m, a width of 2.2 m and a length of 2.6 m, the snow gun is particularly compact and therefore easy to transport. The T40 weighs 600 kg and is also entirely suitable for airlifting. The undercarriage mounting provides additional mobility and flexibility as it can be attached to any snowcat for transportation.

Two-part transport frame with jacks

The stand and the optional two-part undercarriage allow a simple conversion of mobile units to a fixed lift-mounted installation. The front section of the undercarriage can be removed from the snowcat blade with a few hand movements and the machine can be linked up and attached directly to the lift carriage. The jacks and rear section of the undercarriage can then be dismantled.

Fixed tower-mounted installation

Fixed tower-mounted snow gun installations are typically used for slope sections which are difficult to access and require large amounts of snow. The elevated position of the snow gun improves the snow output. The tower consists of a steel column which is 1.6 m high, and the mounting base has a height of 20 cm. The installation process is simplified by the low weight. Covering mats also come as standard, as does a service platform.

Fixed lift-mounted installation

In the case of lift-mounted installations, the snow gun is mounted on a steel column which is 3.5 m or 4.5 m high and has lifting platform. This has a centering device to ease initial installation or to enable air installations. The snow gun is operated by Bluetooth remote control or from the ground by means of an optionally available keyboard at ground level. Lifts are available in manual design, with HIT-TRAC 8 or with hydraulic systems. Maintenance work can be carried out with the aid of various systems. Snow guns mounted on manual lifts can be lowered by means of a jack-hoist mechanism. The HIT-TRAC 8 lift can be operated with the HIT-TRAC 8 motor-driven rope pulling machine. The rope runs through the pulley assembly at the top of the lift and a return pulley on the carriage, thereby raising and lowering the snow gun complete with carriage. With the hydraulic lift, the snow gun is raised or lowered using an electric pump and hydraulic cylinder inside the lift column.

Arm-mounted installation

Snow guns can be mounted on a support arm measuring 12 m in length. This arrangement is typically used on wide sections which receive very little snow and where wind conditions require that the snow gun will need to be located well into the slope layout. The snow guns are operated by Bluetooth remote control or by means of an additional keyboard at ground level.

Facts & figures

PM_Auto_T40_Mobil_Maßzeichnung

Electrical characteristics

Nominal voltage
V
400
Nominal frequency
Hz
50
Nominal current
A
33*
Connection plug
A
5x63
Nominal power - largest motor (turbine)
kW
12,5
Compressor
kW
4
Heating
kW
0,5 ÷ 1,8

Dimensional data

Snow gun length
A
mm
1700
Snow gun width
B
mm
1300
Snow gun height
H
mm
2050
Undercarriage height
H2
mm
350
Total height
H1
mm
2400
Length [max.]
A1
mm
3000
Length [without steering]
A2
mm
2700
Length [without front jacks]
A3
mm
2350
Width [max.]
B1
mm
2350
Track [wheels]
B2
mm
2000

Weights

Snow gun
kg
600
Transport frame with jacks
kg
165
Lifting hook
kg
13
Kit for mobile carriage tow (GRPT0013)
kg
75
Kit for mobile carriage tow (GRPT0056)
kg
60

Various

Operating temperature
°C
-25 ÷ +2
Number of revolutions
rpm
3000
Turbine inclination
deg.
42
Horizontal rotation
deg.
360
Swing (automatic)
deg.
180

Water

Operating water pressure
bar
8 ÷ 40
Water filter
micron
250
Water connection - Camlock
in
2

Nozzle configuration

Nucleators
no.
6
Fixed nozzles - quadrijet type
no.
6
Controllable nozzles - quadrijet type
no.
12
NB:
Subject to technical modifications
Data are subject to change depending on the type of plant and/or the country of installation (please always refer to the wiring diagrams).
*)
Measurements at nominal voltage at 1500 m above sea level and at a temperature of 0°C.